39
Setting Alarm <ALARM>
5
Select <
u
SENSITIVITY> and press the SET
button.
R
The “SENSITIVITY” screen appears.
6
Select <MOVE> and specify a sensitivity level
(1 –10).
R
The greater the number, the lower the responsiveness to
movement becomes.
7
Select <TIME> and specify a detection time of
duration (1 – 60).
R
The greater the number, the lower the detectability against
fast-moving subjects.
■
To confirm the sensitivity of the motion detection
Select <TEST> and press the SET button.
• Make sure that the motion-detected area is properly specified.
To finish the test, press the SET button.
8
Select <MENU> – “BACK” and press the SET
button.
R
Returns to the “ALARM SETTING” screen.
• If you want to finish the settings screen, select “END” and press
the SET button.
·uSENSITIVITY
SET
R
ALARM SETTING
ALARM IN
ALARM OUT
MOTION
uAREA
·uSENSITIVITY
ZOOM
uZOOM TIME
DURATION
ALARM SIGN
1 y
NO
ON
SET y
SET y
OFF
5S
5S
OFF
SENSITIVITY
<MOVE>
· 5
<TIME>
1
TEST
PRESET
MENU
SET
y
OFF
BACK
·<MOVE>
MEMO:
If <ZOOM> is enabled (see page 40), the image on the screen will
be zoomed up when the motion sensor detects movement. If
<ALARM SIGN> is “ON” (see page 41) when <PRIVACY MASK>
is “ON” (see page 42), the alarm notification “A” will be shown on
all the masks.
L5BL2_BM2_US_XE(GB).book 39 ページ ２００６年６月１４日 水曜日 午後１２時５６分
