37
Setting Alarm <ALARM>
4
Set <ALARM OUT> to “ON” or “OFF” for alarm
output.
5
Select <MENU> – “BACK” and press the SET
button.
R
Returns to the “ALARM SETTING” screen.
• If you want to finish the settings screen, set to “END” and press
the SET button.
1
Select <ALARAM OUT> and specify a polarity for
the signal.
■
When an alarm has been detected
• The image is zoomed up (see page 40).
• An alarm notification is displayed (see page 41).
ON
: Outputs alarm signal at alarm input detection.
• No alarm signal is output if the alarm input is received while the
monitor is displaying the settings screen.
OFF
: No alarm signal output.
Note:
If an alarm is detected (including motion detection) during sequential
pan or auto pan, the sequential pan or auto pan stops for the time
set in <DURATION> (see page 40). The original operation is
resumed once the duration has elapsed.
ALARM IN SETTING
POLARITY
MOVE
·ALARM OUT
NO
OFF
OFF
·ALARM OUT
Specifying Alarm Output <ALARM OUT>
NO
: Normal Open (Closes when alarm input is detected.)
NC
: Normal Close (Opens when alarm input is detected.)
MEMO:
For the electrical characteristics of alarm output, the nominal
output of the open collector (grounded emitter) is 18 V 25 mA.
ALARM SETTING
ALARM IN
·ALARM OUT
MOTION
uAREA
uSENSITIVITY
ZOOM
uZOOM TIME
DURATION
ALARM SIGN
PRESET
MENU
1 y
NO
OFF
SET y
SET y
OFF
5S
5S
OFF
OFF
BACK
·ALARM OUT
L5BL2_BM2_US_XE(GB).book 37 ページ ２００６年６月１４日 水曜日 午後１２時５６分
