3-2.BLC level adjustment for the PRESET 1
setting
1
Set the
BLC
switch (9) to
ON
. The on-screen setting for
BLC
will automatically switch to
ON
. Press the
CURSOR
(
j
or
l
)
button to select the on-screen
ON
setting (get it flashing),
then press the
SET
button. The adjustment sub-menu
“
ADJUSTMENT FOR BLC
” will be displayed.
2
Press the
CURSOR
(
d
or
c
) button until
PRESET 1
is selected.
3
Press the
CURSOR
(
l
) button to select
BLC LEVEL
(get it
flashing), then press the
SET
button. The adjustment
sub-menu “
BLC LEVEL
” will be displayed.
4
While looking at the image on the monitor, press the
CURSOR
(
d
or
c
) button until the
BLC
level is obtained. The
on-screen marker (
b
) will move and the adjustment value will
flash according to the
BLC
level setting.
Note:
When an adjustment is made, the PRESET setting will
automatically switch to
OFF
. To return to the initial value, just
return the PRESET setting to
ON
, then press the
SET
button.
5
When finished.
(Refer to step
3
on page
15
.)
Note:
The
BLC
level adjustments should be entered under the
PRESET 1
or
MANUAL 1
settings. The
BLC
level adjustments entered under
the
PRESET 2
or
MANUAL 2
settings will not be effective.
MENU FOR ADJUSTMENT
SYNC INT
IRIS AI
BLC ON
ON
OFF
SET
CURSOR
ADJUSTMENT FOR BLC
BLC MODE PRESET1
BLC LEVEL
ADJUSTMENT FOR BLC
(BLC LEVEL)
o------z------p 15
ADJUSTMENT FOR BLC
BLC MODE PRESET1
Example:
If the backlight
compensation (BLC)
correction is insufficient,
press the
CURSOR
(
d
or
c
) button to move the
on-screen marker close to
the position indicated above.
ADJUSTMENT FOR BLC
(BLC LEVEL)
o------z------p 20
PRESET OFF
END MENU
L53P4/US GB 1998, 3, 11
20
English
