Unit Display and Operation Selector
Remote control receiver
This section picks up infrared signals from the remote control
unit (transmitter).
Operation selector
ON position
This position is for operating the air conditioner with the
wireless remote control unit.
Set the selector to this position for normal operation.
OFF position
Switch the selector to the OFF position if you are not going to
use the air conditioner for a few days or longer.
The OFF position does not disconnect the power. Use the main
power switch to turn off power completely.
TEST and DEMO.
position
This position is used only when servicing the air conditioner.
CAUTION
Do not set at the TEST and DEMO. position for normal
operation.
OPERATION lamp
This lamp lights when the system is in the continuous DRY or
COOL mode.
TIMER lamp
This lamp lights when the system is being controlled by the
timer.
OPERATION
TIMER
OPERATION
lamp
Operation selector
Remote control
receiver
INDOOR UNIT
SAP-KMV181G
TIMER lamp
IMPORTANT
Avoid using radio equipment such as mobile
phone near (within 1 m of) the indoor unit. Some
radio equipment may cause the unit to
malfunction.
If the trouble occurs, disconnect power and restart
the air conditioner after a few minutes.
OPERATION lamp
Operation selector
Remote control receiver
INDOOR UNIT
SAP-KMV91G
TIMER lamp
*
NOTE
* This lamp lights only when
conducting service inspections.
*
6
OI-306-06EG
oi306000
