Sanyo POA-WL11, Operation Manual

Page: 58 / 332

PC Adjustment
This feature optimizes the signal from a connected PC for better quality projection.
[NOTE] [PC] control screen is only displayed when analog computer is selected as the
input source.
Parameter Description
Auto PC Adjustment Click [Start] button to initiate Auto PC Adjustment.
Fine Synch Use / button to adjust tracking.
Total Dots Use / button to adjust total dot counts for horizontal synch.
Position Use / /
▲
/
▼
button to adjust the screen position.
Comment You can store any comments regarding the PC Adjustment settings. To save
the comments you entered, click [Save] button.
SYSTEM
You can select a color system for input signal and scan mode.
[NOTE] [SYSTEM] control screen is only displayed when Video is selected as the input
source.
Parameter Description
Color System Adjustment Select a color system for the input signal by clicking the radio button,
(VIDEO, S-VIDEO input only) and click [Set].
AUTO:
Automatically adjust to the color system of input signal.
PAL, SECAM, NTSC, NTSC4.43, PAL-M, PAL-N:
You can select the color system manually.
System Adjustment Select a scan mode for the input signal by clicking the radio button,
(Y,Pb/Cb,Pr/Cr input only) and click [Set].
AUTO:
Automatically adjust to the scan mode of input signal.
1080i, 1035i, 720p, 575p, 480p, 575i, 480i:
You can select the scan mode manually.
[NOTE] Since configuration parameters vary depending on the projector model, the contents
mentioned above may be different from the actual configuration. For details, refer to
Owner’s Manual of each projector.
▼ ▼
▼ ▼
▼ ▼
Chapter 5. Operating the WI Client
— 58 —