24
Input Source and System Selection
Press the INPUT button on the top control or the INPUT buttons on
the remote control (see below) to choose an input source.
Top Control
INPUT button
Press the VIDEO, S-VIDEO, C1, C2, H1, H2, or PC buttons on the
remote control according to the input source.
Remote Control
INPUT buttons on the remote control
INPUT buttons
When the video signal is connected to the VIDEO
jack, press VIDEO.
VIDEO
When the video signal is connected to the S-VIDEO
jack, press S-VIDEO.
S-VIDEO
When the video signal is connected to the
COMPONENT 1 jack, press C1.
C1
When the video signal is connected to the HDMI 1
terminal, press H1.
H1
INPUT button
Video
S-video
PC
When the computer signal is connected to the
COMPUTER connector, press PC.
Component 1
Component 2
HDMI 1
HDMI 2
✔
Note:
• Before selecting an input source with these buttons, each input
must be set on a proper signal form via menu operation (see on
pages 25 – 26).
Computer
✔
Note:
• When switching from HDMI1 to HDMI2 or vice versa, the signal
may be interrupted for a moment depending on the equipment.
Input
When the video signal is connected to the
COMPONENT 2 jack, press C2.
C2
When the video signal is connected to the HDMI 2
terminal, press H2.
H2
