12
To ensure safe operation, please observe the following precautions:
●
Use two (2) AA or LR6 type alkaline batteries.
●
Always replace batteries in sets.
●
Do not use a new battery with a used battery.
●
Avoid contact with water or liquid.
●
Do not expose the remote control to moisture or heat.
●
Do not drop the remote control.
●
If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries.
●
Risk of explosion if battery is replaced by an incorrect type.
●
Dispose of used batteries according to the instructions.
Point the remote control toward the projector (Infrared Remote Receiver) when pressing any buttons. Maximum operating
range for the remote control is about 16.4’ (5 m) and 60 degrees in front of the projector.
16.4’
(5 m)
30°
Remote Control Operating Range
Open the battery
compartment lid.
Install new batteries
into the compartment.
Replace the compartment lid.
1
2
3
* When the batteries of the remote control are replaced, the remote
control code automatically returns to the initial code (Code 1) (p.41).
Remote control
Part Names and Functions
Two AA size batteries
For correct polarity (+ and –),
be sure battery terminals are
in contact with pins in the
compartment.
Pull up the lid
and open it.
Remote Control Battery Installation
30°
