7
Basic Operation
For detailed functions of each menu, see “Menu Tree” on pages 82-84.
Main Menu
Sub-Menu
e
Image select
For computer source, used to select an image level among
Dynamic, Standard, Real,
and
Image 1-10
(p.39)
.
For Video source, used to select an image level among
Dynamic, Standard, Cinema,
and
Image 1-10
(p.47)
.
r
Image adjust
For computer source, used to adjust the computer image.
[Contrast/Brightness
/
Color management
/
Color temp./
White balance (R/G/B)/Offset(R/G/B)
/
Auto picture control
/
Advanced color
/
Sharpness/Gamma/Reset/Store]
(pp.40-42).
For video or HDMI source, used to adjust the video image.
[Contrast/Brightness/Color/Tint/Color management
/
Color temp./White balance (R/G/B)/Offset (R/G/B
)
/Auto picture control
/
Advanced color
/
Sharpness/Gamma/
Noise Reduction/Progressive/Reset/Store] (
pp.48-50
).
w
PC adjust
Used to adjust the parameters to match with the input signal format
(pp.36-38)
.
t
Screen
For computer source, used to adjust the size of the image.
[Normal/Full/Wide(16:9)/Zoom/True/Custom/Custom
adj./Digital zoom +/-/Keystone/Ceiling/Rear/Screen aspect/Reset]
(pp.43-45).
For video or HDMI source, used to adjust the size of the image.
[Normal/Full/Wide(16:9)/Zoom/Natural
wide/Custom/Custom adj./Keystone/Ceiling/Rear/Screen aspect/Reset] (
pp. 51-52
).
q
Input
Used to select an input source (Input 1, Input 2, Input 3, or Input 4) (p.32-34).
u
Information
Display
s
the input source information:
Input, H-sync freq., V-sync freq., Screen, Lamp mode
,
Lamp control
,
Lamp
interval
,
Lamp 1
,
Lamp
,
Language, Filter counter, Power management, Key lock, PIN code lock, Shutter
management, Remote control, SERIAL NO., and
Option control No. (
p.29
).
o
Guide
The key operation is displayed.
y
Setting
Used to set the projector’s operating configurations
(pp.53-68).
i
Network
See the owner’s manual of “Network Set-up and Operation”.
Main Menu
q
w
e
r
t
y
u
i
o
