background image

6

AC Power Cord Requirement

The AC Power Cord supplied with this LCD monitor meets the requirement for use in the country in which you  
purchase it . 

AC Power Cord for the United States and Canada:

AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified  
by the Canadian Standard Association (CSA) .
AC Power Cord has a grounding-type AC line plug. This is a safety feature to make sure that the plug will fit into the power outlet.  
Do not try to defeat this safety feature . Should you be unable to insert the plug into the outlet, contact your electrician .

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE

End-User License

The product (meaning the equipment or appliance to which this documentation relates) incorporates Software (the software applications, utili-
ties and modules embedded within the Product) which is owned by Sanyo or its licensors . Before using the product, please read the End-User 
License Conditions detailed below . If you do not agree to the terms and conditions of the End-User License, Please do not proceed to use the 
Product- repack the Product unused and return it to your supplier together with proof of purchase for a full refund. By using the product, you 
agree to be bound by the terms and conditions of the End-User License .

License Grant, Conditions and restrictions

1.

  Sanyo grants you a non-exclusive, world-wide (subject to export controls), non-transferable (except as permitted by 2 below), royalty-free 

license to use the Software upon and with the Product .

2.

  You may not transfer any of your license rights in the Software without the prior written consent of SANYO and if consent is provided then 

the Software shall only be transferred in conjunction with the transfer of the Product AND provided that the transferee has read and agreed 
to accept the terms and conditions of this license .

3.

  You must ensure that the copyright, trademark and other protective notices contained in the Software are maintained and not altered or 

removed .

4.

  The Software provided hereunder is copyrighted and licensed (not sold) . SANYO especially does not transfer title or and ownership rights 

in the Software to you . The Software provided hereunder may contain or be derived from portions of materials provided to SANYO under 
license by a third party supplier .

.

 Except as expressly permitted by statute 

you may not

;

 

 

use the Software in conjunction with any other computer hardware other than the product;

  

copy all or part of the Software;

  

incorporate all (or any of) the Software into other programs developed by (or on behalf of) you and/or used by you;

  

reverse-engineer, decompile or disassemble the Software;

  

make the Software (or any part of it) available, or permit its redistribution, for use with any computer hardware other than the Product; or  
rent, lease, gift, loan, sell, distribute or transfer possession of the whole or any part of the Software .

Termination

This license is effective until terminated . This license will terminate automatically without notice if you fail to comply with any of its provisions .

Disclaimer

1.

  The Software is(to the extent permitted by law) supplied “as is” and SANYO and its suppliers expressly exclude all warranties, express or 

implied, including (but not limited to) warranties of satisfactory quality, fitness for purpose and non-infringement (save to the extent that the 
same are not capable of exclusion at law) .

2.

  In no circumstances will SANYO be liable for any direct, indirect, consequential, or incidental damage (including loss of profits, business 

interruption, loss of data or the cost of procurement of substitute goods, technology or services) arising out of the use or the inability to use 
the Software (save to the extent that such liability is not capable of exclusion at law) .

General

1.

  This End-User License will be governed by laws of England and the User may only bring claims in the English Courts and SANYO shall be 

entitled to bring a claim in the courts of any jurisdiction .

2.

  This End-User License is governed by the laws of the State of California . The End-User and Sanyo agree that any action to enforce or inter-

pret the terms of this End-User License shall be brought only in the appropriate state or federal court located in Los Angeles County, Califor-
nia . The End-User and Sanyo hereby submit to the exclusive jurisdiction and venue of such court .

3.

  The above terms and conditions supersede any prior agreement, oral or written, between you and SANYO relating to the Software .

SERVICING

GROUND

GB

GB

Summary of Contents for PID-42AE1 - 16:9























Reviews: