Sanyo PDG-DWL2500 - 2500 Lumens Owner'S Manual Download Page 25

Page: 25 / 82

Zoom and Image Position Adjustment

Press the ZOOM +/- buttons on the top control to adjust the
screen size. Screen size can be adjusted 84% to 100% from
its maximum screen size.

It is not available when On-Screen menu is displayed.

Zoom adjustment can be memorized. (p.52)

Focus Adjustment

Adjust the lens focus with the focus lever.

Focus Lever

The image position can be adjusted in the Zoom
Adjustment.

Top Control

ZOOM +/–

buttons

Press the ZOOM+ or ZOOM- button on the top control.

While ZOOM+ or ZOOM- is displayed on the screen,
press the SELECT button. Arrow marks displayed on
the screen.

Press the Point

ed7 8

buttons on the top control or

the remote control to adjust the image position.

Note:

• Zoom and Image Position Adjustment

can not be operated when

4:3

16:9

mode is selected in the Screen aspect
menu or

Custom

is selected in the

Screen menu (pp.38-40, 46-47).

• The image position adjustment can not

be adjusted at ZOOM maximum.

• The white arrows indicate that there is no

correction.

• A red arrow indicates the direction of

correction.

• An arrow disappears at the maximum

correction.

Basic Operation

Zoom +/–

disappears

after 4 seconds.

Zoom +/–

Screen

Image

Summary of Contents for PDG-DWL2500 - 2500 Lumens



















































































Search results

Summary of Contents for PDG-DWL2500 - 2500 Lumens

Reviews:

Related manuals for PDG-DWL2500 - 2500 Lumens

Brands by name

Popular brands

Sanyo PDG-DWL2500 - 2500 Lumens, Owner'S Manual

Search results

Summary of Contents for PDG-DWL2500 - 2500 Lumens

Reviews:

Related manuals for PDG-DWL2500 - 2500 Lumens

Brands by name

Popular brands