Sanyo PDG-DWL2500 - 2500 Lumens, Owner'S Manual

Page: 24 / 82

2
Menu Bar
For detailed functions of each menu, see “Menu Tree” on pages 72-73.
①
②
③
④
⑤
⑥
⑦
⑧
Main Menu Sub-Menu
⑨
⑩
①
Input Used to select an input source from Computer 1 , Computer 2 , HDMI , Video or
S-video . (pp.30-31, 41-42)
②
PC adjust Select Auto PC adj . , Fine sync , Total dots , Horizontal , Vertical , Current mode and
Clamp to adjust the parameters to match with the PC input signal format. (pp.33-35)
③
Image select Used to select an image mode from among Dynamic , Standard , Real, Cinema and
Image 1- . (p.36)
④
Image adjust
For computer source, used to adjust computer image [ Contrast , Brightness , Color
temp . , White balance (Red/Green/Blue), Sharpness and Gamma ]. (p.37)
For video or HDMI source, used to adjust picture image [ Contrast , Brightness , Color ,
Tint , Color temp . , White balance (Red/Green/Blue) , Sharpness , Gamma , Noise
reduction and Progressive ]. (pp.44-45)
⑤
Screen
For computer source, used to adjust size of the image [ Normal , Full , Wide (16:9) , Zoom ,
True , Custom , Digital zoom +/–, Keystone , Ceiling , Screen aspect and Colorboard ].
(pp.38-40)
For video or HDMI source, used to set size of image [ Normal , Full , Wide (16:9),
Zoom , Natural wide , Custom, Keystone , Ceiling , Screen aspect and Colorboard ].
(pp.46-47)
⑥
Sound Used to adjust the volume or mute the sound. (p.27)
⑦
Setting
Used to set the projector’s operating configurations. (pp.50-62)
⑧
Information Display the input source information: Input , H-sync freq . , V-sync freq . , Screen ,
Language , Lamp status , Lamp counter , Power management , Key lock , PIN code
lock , Remote control , and SERIAL NO . . (p.63)
⑨
Network See owner’s manual of “Network Set-up and Operation”.
⑩
Guide The key operation is displayed.
Basic Operation