11
i
3D SyNC OUT
Connect a 3D sync. signal cable for an IR wireless
emitter to this jack (p.48)
o
LAN Connection Terminal
Connect the LAN cable (refer to the owner’s
manual of "Network Set-up and Operation").
!0
COMPUTER IN 1/COMPONENT IN
Connect output signal from a computer, RGB scart
21-pin video output or component video output to
this terminal (pp.16, 18).
!1
COMPUTER IN 2/MONITOR OUT
This terminal is switchable and can be used
for input from a computer or output to the other
monitor.
Set the terminal up as either Computer input or
Monitor output properly. [Used for Monitor out,
this terminal outputs only incoming signal from
COMPUTER IN 1/COMPONENT IN terminal (pp.
16, 56)].
!2
HDMI
Connect the HDMI signal from computer or video
equipment to this terminal (pp.16, 18).
q
S-VIDEO IN
Connect the S-VIDEO output signal from video
equipment to this jack (p.17).
w
VIDEO IN
Connect the composite video output signal to this
jack (p.17).
e
AUDIO IN
Connect the audio output signal from video
equipment connected to
q
or
w
to this jack. For
a monaural audio signal (a single audio jack),
connect it to the L (MONO) jack (p.17).
r
COMPUTER 1/COMPONENT AUDIO IN
Connect the audio output (stereo) from a computer
or video equipment connected to
!0
or
!2
to this
jack (pp.16, 18).
t
COMPUTER 2 AUDIO IN
Connect the audio output (stereo) from a computer
connected to
!1
to this jack (pp.16, 18).
y
AUDIO OUT (VARIABLE)
Connect an external audio amplifier to this jack
(pp.16-18).
This terminal outputs sound from AUDIO IN
terminal (
e
,
r
or
t
) or HDMI terminal
!2
(digital
audio).
u
CONTROL PORT
When controlling the projector with RS-232C,
connect the control equipment to this connector
with the serial control cable.
Part Names and Functions
q
Side Terminal
w
e
r
y
t
u
i
o
!0
!1
!2
Summary of Contents for PDG-DWL2500 - 2500 Lumens
Page 82: ...KG8AC ...
