PDG-DSU30 Expand Serial Command Functional Specifications
22 / 42
8.8
Lamp Command
8.8.1
CF_LAMPH Command
Command
“CF_LAMPH_%1”[CR]
%1
“RST”-----------------Reset Lamp counter.
Details
Reset total lamp running time
This command is available in normal Power ON status.
Correspondence
Acceptable
“000” [CR]
Unacceptable
“Error Code” [CR]
8.8.2
CF_LAMPMODE Command
Command
“CF_LAMPMODE_%1” [CR]
%1
“ON” ---------------------------- Set ECO mode On
“OFF” -------------------------- Set ECO mode Off
Details
Select Eco mode. (Valid only when in the normal Power ON status.)
The value set by this command is stored in EEPROM and the setting value
remains after the power is ALL OFF.
No display is shown when projector received command..
Correspondence
Acceptable
“000” [CR]
Unacceptable
“Error Code” [CR]