PDG-DSU30 Expand Serial Command Functional Specifications
26 / 42
8.10.8 CF_P-MANETIME Command
Command
“CF_P-MANETIME_%1” [CR]
%1
“000~180” ----------- Directly specify the timer to operate Power management
“UP” ------------------- Increase the timer for Power management
“DN” ------------------- Decrease the timer for Power management
Details
Set up Power Management. (Valid only in the normal Power ON status.)
The value set by this command is stored in EEPROM and its setting is
effective even after ALL is OFF.
No display is shown when projector received command.
Correspondence
Acceptable
“000” [CR]
Unacceptable
“Error Code” [CR]
8.10.9 CF_STANDBYMODE Command
Command “CF_STANDBYMODE_%1”[CR]
%1
“ON” ---------------------- Select Standby
“OFF” -------------------- Select Active
Details
Set up Power mode . (Valid only in the normal Power ON status.)
The value set by this command is stored in EEPROM and its setting is effective
even after ALL is OFF.
No display is shown when projector received command.
Response
Acceptable
“000”[CR]
Unacceptable “Error Code”[CR]
8.10.10 CF_SLEEPTIME Command
Command
“CF_SLEEPTIME_%1” [CR]
%1
“000~995 ----------- Directly specify the time to sleep
“UP” ------------------- Increase the timer by 5steps
“DN” ------------------- Decrease the timer by 5steps
Details
Set up Power Management. (Valid only in the normal Power ON status.)
The value set by this command is stored in EEPROM and its setting is
effective even after ALL is OFF.
No display is shown when projector received command.
Correspondence
Acceptable
“000” [CR]
Unacceptable
“Error Code” [CR]
8.10.11 CF_LAMPLIFERE Command
Command “CF_LAMPLIFERE_%1”[CR]
%1
“ON” --------------------- Set Lamp Life Reminder On
“OFF” ------------------- Set Lamp Life Reminder Off
Details
Set up Eco. Standby (1w). (Valid only in the normal Power ON status.)
The value set by this command is stored in EEPROM and its setting is effective
even after ALL is OFF.
No display is shown when projector received command.
Response
Acceptable
“000”[CR]
Unacceptable “Error Code”[CR]