PDG-DSU30 Expand Serial Command Functional Specifications
25 / 42
8.10.4 CF_BACKGND Command
Command
“CF_BACKGND_%1” [CR]
%1
“BLUE” -------------------- Select Blue Back
“BLACK” ------------------ Select Black Back
“RED” ---------------------- Select Red Back
“GREEN” ------------------ Select Green Back
“WHITE” ------------------- Select White Back
Details
Set Background.(Available only in the normal Power ON status)
The status set by this command is stored in EEPROM and the setting remains
even after the power is ALL OFF.
No display is shown when projector received this command.
Response
Acceptable
“000” [CR]
Unacceptable “Error Code” [CR]
8.10.5 CF_LOGO Command
Command “CF_LOGO_%1_%2”[CR]
%1
“ON” -------------------------- Set Logo display ON
“OFF” ------------------------- Set Logodisplay OFF
Details
Set Logo. (Available only in the normal Power ON status)
The value set by this command is stored in EEPROM and its setting is effective
even after ALL is OFF.
No display is shown when projector received this command.
Response
Acceptable
“000”[CR]
Unacceptable “Error Code”[CR]
8.10.6 CF_HIGHLAND Command
Command
“CF_HIGHLAND_%1” [CR]
%1
“ON” -------------------------- Set High land ON
“OFF” ------------------------- Set High land OFF
Details
Set up High-altitude function. (Valid only in the normal Power ON status.)
The value set by this command is stored in EEPROM and its setting is
effective even after ALL is OFF.
No display is shown when projector received this command.
Correspondence
Acceptable
“000” [CR]
Unacceptable
“Error Code” [CR]
8.10.7 CF_ON-STA Command
Command
“CF_ON-STA_%1” [CR]
%1
“ON” --------------------------- Set Direct-Power-On ON
“OFF” ------------------------- Set Direct-Power-On OFF
“UP” --------------------------- Switch setting (On
→
Off
→
On
→
･･･
)
“DN” --------------------------- Switch setting (On
→
Off
→
On
→
･･･
)
Note) “UP” and “DN” behave the same.
Details
Set up Direct-Power-On function. (Valid only in the normal Power ON status.)
The value set by this command is stored in EEPROM and its setting is
effective even after ALL is OFF.
No display is shown when projector received command.
Correspondence
Acceptable
“000” [CR]
Unacceptable
“Error Code” [CR]
