PDG-DSU30 Expand Serial Command Functional Specifications
17 / 42
8.4.9
CF_COLTEMP Command
Command
“CF_COLTEMP_%1” [CR]
%1
“HIGH” ------------------------------Select High
“MEDIUM” ------------------------- Select Medium
“LOW” ------------------------------ Select Low
Details
Set Color Temperature
(Available only in the normal Power ON status)
No display is shown when projector received command.
Correspondence
Acceptable
“000” [CR]
Unacceptable
“Error Code” [CR]
8.4.10 CF_COLSET_%1_%2 Command
Command
“CF_COLSET_%1_%2”[CR]
%1
Set value of %1
“RGAIN”------------------------ Select Red Gain
“GGAIN”------------------------ Select Green Gain
“BGAIN”------------------------ Select Blue Gain
“RBIAS”------------------------ Select Red Bias
“GBIAS”------------------------ Select Green Bias
“BBIAS”------------------------ Select Blue Bias
“CYAN” ------------------------ Select Cyan
“YELLOW” -------------------- Select Yellow
“MAGENTA” ------------------ Select Magenta
“RST” --------------------------- Select Reset
%2
Set value of %2
“-50~050”------------------Directly specify setting value.
“RST” -----------------------Reset the mode of Color setting
Ex
：
CF_COLSET-RGAIN_005 --- Set Color setting
：
Red Gain value to 5
CF_COLSET-SET_SET --- Reset the value of Color setting
Details
Set value of each item of Color setting
(Available only in the normal Power ON status)
No indication display is shown when receiving the command.
Correspondence
Acceptable
“000” [CR]
Unacceptable
“Error Code” [CR]
8.4.11 CF_COLSPACE Command
Command
“CF_COLSPACE”[CR]
%1
“AUTO”------------------------ Select Auto
“RGB”-------------------------- Select RGB
“YUB”-------------------------- Select YUV
Details
Set value of Color space. (Available only in the normal Power ON status)
No indication display is shown when receiving the command.
Correspondence
Acceptable
“000” [CR]
Unacceptable
“Error Code” [CR]
