Sanyo MM-7500, User Manual

Page: 36 / 345

26 Section 2A: Your Sprint PCS Phone – The Basics
Making and Answering Calls
Making Calls
Placing a call from your Sprint PCS Phone is as easy as making a
call from any land line phone. Just enter the number and press
, and you’re on your way to clear calls.
To make a call using your keypad:
1.
Make sure your phone is on.
2.
Enter a phone number from standby mode. (If you make a
mistake while dialing, press
to erase one digit at a time.
Press and hold to erase the entire number.)
3.
Press . (To make a call when you are roaming
and Call Guard is enabled, see “Using Call Guard”on
page 105.)
4.
Press or close the phone when you are finished.
Tip:
When making calls off the Nationwide Sprint PCS Network, always dial
using 11 digits (1 + area code + phone number).
You can also place calls from your Sprint PCS Phone by using
Sprint PCS Voice Command
SM
(page 305), Speed Dialing
(page 41), Automatic Speech Recognition (page 158), and
using your Call History listings (page 118).
Important:
To maximize
performance when using your
Sprint PCS Phone, extend the
antenna before a call and do not
touch the antenna during a call.
Correct Incorrect