Sanyo 1AV4U19B25500, Network Manual

Page: 93 / 154

Select "Network" as input mode previously.
1
Access to the control page of the projector by using the web
browser. From the Network menu, click Capture tab to display
the setting page.
2
Select the computer number from the pull-down menu button
of "Connecting PC" and click Start button. The screen image of
the selected computer will appear on the projected screen in
real time.
• To stop capturing, click One-shot button. The captured image
of the computer on the screen is frozen.
• To restart capturing, click Start button.
3
To end capturing, click End button.
✐
The IP address of the connecting PC should be registered previously (
+
p.91).
✐
If the error message appears, check item "Parameter set up" (
+
p.90).
✐
To use the capture function from the web browser or projector, the Network Capture 5 on the captured computer
must be activated.
PC4 PC3 PC6
Capture
PC5
PC2 PC1
* PC provides the Network Capture.
Project a screen
image of PC1 with
PJ2.
PJ2
PJ1
* Start capturing of
the PC1 f rom the
PC5.
[2] Control by the web browser
Set "On" when
using the wireless
mouse function
Using the real time capture
Item Description
Interrupt connection ............... Set enable or disable the real time capturing
connection from other computers during executing
the real time capturing operation.