Sanyo 1AV4U19B25500, Network Manual

Page: 25 / 154

r
This software is to project the computer screen via the networks.
Select "All Programs" from the start menu --> Network Viewer & Capture 5" -->
"Network Capture 5", then following screen will appear. Then the program will start.
Parts Names and Functions of the Screen
q
Search PJ button
Search the projector connected to the networks.
w
Specify IP button
When connected to a different segment network, the projector can not be retrieved automatically.
In that case, press this button, the "Search specified IP address list" window appears, and then
click Add button and enter the IP address directly to specify the projector in another window. The
registered multiple IP addresses can be searched at a time.
e
Wireless easy setting button / Wireless easy release button
Configure the Wireless LAN setting just by clicking this button. (The setting will be stored as AdHoc
system) For details, refer to "5. Wireless LAN configurations"-->"Easy wireless setting" (p.41). To
restore the easy setting, press the Wireless easy release button.
r
Network Projector List
Display all the projectors connected to the networks.
Show unoccupied projector as “On standby” and occupied projector as “Real time capturing” or "In
One-shot mode". When registered in a moderator’s group, "On Moderator mode" will be shown.
The indication of the status of use with "#" indicates that your computer is now using the network
capture function. After double-clicking on a projector name, the web browser gets activated and
the projector setup screen will be displayed.
Network Capture 5 window
q w
o
i
!0
!1
!3
t
y
!2
u
Network Capture 5 window
!4
e