Sanyo 1AV4U19B25500 Network Manual Download

Page: 31 / 154

When set up the projector in the location separated by the router and the segment is different;
Projector will not be found nor displayed. In that case, the projector needs to be searched directly by
the IP address.

1. Press

Specify IP

button. "Search specified IP address" window appears.

2. Click

Add

button, "IP address set up" window appears. Enter the IP address of the projector and Click

button. Then, the projector will be added on the "Search specified IP address" window. Multiple

projectors are registered and they are stored even when the application is closed.

3. Click

button on the "Search specified IP address" window, the registered multiple projectors

will be searched. Then, the projector will be added on the Network Projector List of the application
window.

"IP address set up" window

Specify IP button

Network Projector list

Confirming the operation

"Search specified IP address" window

Summary of Contents for 1AV4U19B25500



























































































































































Search results

Summary of Contents for 1AV4U19B25500

Reviews:

Related manuals for 1AV4U19B25500

Brands by name

Popular brands

Sanyo 1AV4U19B25500, Network Manual

Search results

Summary of Contents for 1AV4U19B25500

Reviews:

Related manuals for 1AV4U19B25500

Brands by name

Popular brands