A4b Automatic Dispenser
V1.0
5
Canister assembly: container of colorant is with piston pump and valve, on the valve there is a valve
handle and a nozzle for colorant dispensing ,as fig 4.1.
1.
Do not overtake the maximum colorant volume.
2. The nozzle should be kept clean.
3. After refilling canister, the lid should be fastened to prevent colorant from drying.
Turntable Assembly: it is used to fix the canisters and drive them to the
dispensing position as well as stir the colorants to prevent the sedimentation.
See 4.1.
Cleaning Parts
：
clean the nozzle after dispensing, the washing wheel
Inside the cleaning box shall be kept clean. Check the water level and
change the water every day (do not exceed the MAX). See 4.1 and 4.6.
Lifting Parts
：
it drives the puncher; controls the piston pump during
dispensing; and open the valve. Only authorized personnel are allowed to open the front door for service.
See 4.2.
Hydraulic Loading Parts: base paint cans are located here. See 4.3.
Puncher
：
it is used to punch the base paint can cover. See 4.4.
Turntable Driving Parts: poly v-belt is adopted to drive the turntable for sending the canisters to the
dispensing positions. See 4.5.
5. Installation
5.1 Machine
Keep this machine on the solid ground, then adjust the feet to make the foundations on a horizontal
status before working.
Before installation and maintenance, must cut off the power supply and unplug from outlet.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is
dropped or damaged in any manner. Contact the nearest authorized service facility for examination,
repair, or electrical or mechanical adjustment.
Do not lengthen the power line.
4.6
