A4b Automatic Dispenser
V1.0
1
1. Using Requirement
1)
Please read the manual carefully before installation and operation.
2)
Working environment temperature: 0 ℃ ～ +55 ℃ , relative humidity: 15% ～ 90%.
Transformation and storage temperatures shall be within a range of -10 ℃ to +55 ℃
and for short periods not exceeding 24h at up to +60 ℃
3)
The machine is for indoors use only.
4)
The machine is not explosion-proof, neither the machine as a whole nor its internal
components are intended for use in potential explosive atmospheres.
5)
Do keep the children away from the machine. Do not operate the machine except for the staff
6)
Do provide separate power supply socket and overcurrent protection device for this machine.
Make sure the loading capacity of the socket shall be in line with the requirements listed
in the Nameplate. Please provide every single phase at least 1.5mm² power supply wire for
this machine.
7)
Please confirm that there is dependable ground wire with the electrical socket before usage
8)
Before installation and maintenance, must cut off the power supply and Unplug from outlet.
9)
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord
10)
Do not operate any appliance with a damaged cord or plug, or after the appliance
malfunctions or is dropped or damaged in any manner. Return appliance to the nearest
authorized service facility for examination, repair, or electrical or mechanical
adjustment.
11)
Do not lengthen the power line at pleasure in case of accident
12)
Keep this machine on the solid ground, then adjust the foundation to make the foundations
on a horizontal status before working
13) Do not operate the machine in case the machine shell is removed.
14) Computer composition:
1
CPU PIII
2
CD-ROM Driver
3
15 Inches Monitor, screen resolution is 1024X768 pixels or higher
