Table of Contents
1. Intended Application(s) ................................................... 2
2. Registration ................................................................... 2
3. Specifications ............................................................ 3
4 . Installation .................................................................... 3
4.1 Remove Compressor Shipping Support...................... 3
4.2 Location .................................................................... 3
4.2A No Ducting ............................................................ 3
4.2B Duct Outlets .......................................................... 3
4.2C Remote Area w/Outlets Ducted ............................. 3
4.3 Electrical Requirements ............................................. 4
4.4 Install Leveling Feet ................................................... 4
4.5 Condensate Water Removal ....................................... 4
5. Ducting .......................................................................... 4
5.1 Outlet Duct Kit ........................................................... 4
6. Operation ....................................................................... 4
6.1 Humidity Control Adjustment ..................................... 4
6.2 Fan Switch ................................................................ 4
Installation
7. Maintenance .................................................................. 5
7.1 Air Filter..................................................................... 5
8. Service .......................................................................... 5
8.1 Technical description ................................................. 5
8.2 Troubleshooting ......................................................... 5
8.3 Defrost Thermostat .................................................... 6
9. Service Parts List ........................................................... 6
10. Accessory/Replacement Parts List ............................... 6
11. Wiring Diagram ............................................................ 6
Warranty ............................................................................ 7
Precautions
• Do not operate the Santa Fe
™
Advance2 with a cut or
frayed power cord.
• Do not unplug the unit by pulling on the cord. Grasp the
plug firmly and pull it out of the wall socket or power
receptacle.
• Always use a grounded outlet.
• Never operate electrical equipment near or in standing
water.
• Do not stick your fingers or other objects through the safety
grill.
• When changing filters, do not stick fingers or other objects
in the unit.
• No user serviceable components. Contact installer or call
1-800-533-7533, Ext. 8459 for all repair or warranty needs.
• Do not restrict airflow in to or out of the unit. This may
cause the unit to overheat.
• The unit should never be serviced or cleaned while it is
plugged in.
• Do not sit or stand on the unit, or use as a shelf or table.
• Before leaving the unit unattended, ensure children do not
have access to the equipment. Do not allow children to play
with or near the unit or in its air flow.
• The unit is designed to be installed indoors only.
Read the installation, operation and maintenance
instructions carefully before installing and using
this unit. Proper adherence to these instructions is
essential to obtain maximum benefit from your Santa Fe
Advance2 dehumidifier.
Read and Save These Instructions
WARNING!
— This symbol means important
instructions. Failure to heed them can result in serious
injury or death.
CAUTION!
— This symbol means important
instructions. Failure to heed them can result in injury or
material property damage.
1. Intended Application(s)
The Santa Fe Advance2 is intended for use in crawlspaces
or basements: however, the unit can be placed in almost
any residential setting where dehumidification is desired.
Use in non-residential applications and pool areas may
void warranty.
The Santa Fe Advance2 works most effectively between 56°
and 95°.
In order to efficiently control humidity levels, the area in
which the dehumidifier is to be operated must be free of
water intrusion or excessive fresh (outside) air infiltration.
Before installing the Santa Fe Advance2, water intrusion and
air infiltration problems should be addressed.
2. Registrations
The Santa Fe Advance2 conforms to UL STD 1995.
TABLE OF CONTENTS
2
Santa Fe Advance2 Installer’s & Owner’s Manual
