Sanremo You, Instruction Booklet

Page: 66 / 227

YOU Connections
66
Connect the intake pipe (2) to a softener (4) with the
impurity fi lter (3) between them.
- Before the softener (4), install a shuttering tap (5)
to separate the water system from the machine.
3
5
4
1
2
WARNING: If the line pressure
exceeds 4 bar, install a pressure
reducer. Only supply with cold
water.
Tank
To fi ll the tank, lift the lid and pour water until the
maximum level is reached.
The machine is set to tank mode by default. To
switch from tank mode to mains mode, remove the
cup warmer and use a slotted screwdriver to turn the
metal lever clockwise as shown in the image.
IMPORTANT: The following must be
performed only by a specialised
and authorised technician.
Near the point of interest there is the label below:
OFF
Mains supply mode is shown on the left, while tank
mode is on the right.