background image

OPERATING INSTRUCTIONS

4

)

Color

 

light

Short

 

press

    

 

,

you

 

can

 

set

 

the

 

desired

 

color

(

7

 

color

 

totally

)

and

 

close

 

the

 

light

;

 Long

 

press

     

to

 

go

 

into

 

an

 

automatically

 

cycling

 

mode

,

changing

 

7

 

colors

 

every

 

5

 

seconds

.

Connect

 

the

 

power

 

unit

 

to

 

wall

 

outlet, the LED indicator will start to blink on the display. 

Now it is possible to switch on the infrared heaters, the light and the music function.

Color

 

light

Time

 

setting

Temperature

 

setting

 

   

Time Temperature

/

+

Time Temperature

/

-

ON

/

OFF

1)Startup

Press  

to switch on the 

 and heaters start to work, the length of

 

 

 

     

display

time is automatically set to 99 minutes 

and the air temperature inside the

 

 

cabin will be presented. Press      again could

 

switch off the heaters.

2)Temperature settings

The 

 display refers to the air temperature.

 

 

left

Press      , you can set the desired temperature

 

from

 

35

℃ 

to

 

60

 

 by pressing

,

10

 

 the       /      keys

Interval=1

;

 The setting number blinks 

 seconds then automatically presents 

the air temperature;  When at this temperature, the heaters will stop working automatically; When it fall 4℃  

 

this temperature, the cabin will start up automatically.

below

 

Please note: The maximum air temperature reachable in the cabin

 

may be lower than the desired 

temperature. This is dependent on

 

the temperature outside the cabin.

 

Default temperature=40

3)Time settings

The 

 display refers to the length of time.  Press

, you can set the desired time 

 

5

   

99mins

right

      

from mins to

 by

 

pressing the      /     

 

keys

Interval=1mins;

   

When

 

count

 

down

 

to

 

00, the heaters will shut off automatically.

 

Default time=99minutes

.

9

/

11

EN

5 Mp3

 

player

)

USB/SD or Bluetooth mode:

You can select songs by short pressing the

     /

 

  

keys and adjust the volume (0-32) by long

 

pressing

the 

  

  

keys. The 

  

 key for pause.

FM radio mode:
Long press

  

 to search stations (87.5MHZ-108MHZ) automatically, the system will save all of them;

You can select stations by short pressing the

     /

 

  

keys and adjust the volume (0-32) by long

 

pressing

the 

  

  

keys.

Activate the MP3 player by pressing and holding the "

” button on the MP3 player. Select the

preferred mode with brief repeated presses of the "

"button on the MP3 player.(USB, MMC CARD,

Bluetooth,FM radio)

USB

FM/MP3/BLUETOOTH PLAYER

Summary of Contents for F20120












Reviews: