Sanosil Q-Jet Advanced 2 Series, Operation And Maintenance Manual

Page: 14 / 28

Sanosil Q-Jet Advanced
14
Fogging time and consumption (standard / higher / high contamination)
WARNING
The dosing values below are a recommendation for well pre-cleaned rooms only and are
based on many years of experience and are partly supported by test reports. However, the
values given are not binding as the disinfection effect can be influenced by many factors.
Binding proof of efficacy must be confirmed by microbiological checks after disinfection.
For room treatments according norm Afnor T72-281 (2014) refer to page 18 (5.5 Step).
The below dosage recommendations are not valid for the norm Afnor T72-281 2014
Dosage values for well precleaned rooms
Room
Size Fogging time/consumption
standard contamination
(8ml/m
3 )
Fogging time/consumtion
higher contamination
(12ml/m
3 )
Fogging time/consumtion
high contamination
(16ml/m
3 )
m 3 time:
Consumption in
ml:
time:
Consumption in
ml:
time:
Consumption in
ml:
10 3 min 99 ml 5 min 165 ml 6 min 198 ml
20 5 min
165 ml
8 min
264 ml
10 min
330 ml
30 7 min 231 ml 7 min 231 ml 14 min 462 ml
40 10 min 330 ml 11 min 363 ml 20 min 660 ml
50 12 min
396 ml
18 min
594 ml
24 min
792 ml
60 15 min 495 ml 23 min 759 ml 30 min 990 ml
70 17 min 561 ml 26 min 858 ml 34 min 1122 ml
80 19 min
627 ml
19 min
957 ml
38 min
1254 ml
90 22 min 726 ml 33 min 1089 ml 44 min 1452 ml
100 24 min
792 ml
24 min
1188 ml
48 min
1584 ml
150 36 min 1188 ml 54 min 1782 ml 72 min 2376 ml
200 48 min
1584 ml
72 min
2376 ml
96 min
3168 ml
250 60 min 1980 ml 90 min 2970 ml 120 min 3960 ml
275 66 min
2210 ml
99 min
3267 ml
132 min
4420 ml
300 73 min 2409 ml 110 min 3630 ml --- ---
350 85 min 2805 ml 128 min 4224 ml --- ---
400 97 min
3201 ml
---
---
---
---
450 109 min 3597 ml --- --- --- ---
500 120 min 3960 ml --- --- --- ---
550 132 min
4356 ml
---
---
---
---
Check temperature of the room, to be between 15 to 35 °C.
Check relative humidity of the room, to be max. 45 % rH. / (before fogging)
at higher humidity, the humidity must be lowered before start-up or a lower dosage of the active substance must be selected.