Installation of roof retainer
Step1
Insert the roof retainer into
the rear frame and strike to
the end. Screw from the
rear frame side.
Do not screw the last three screws
and snow stopper position (page
28) of each roof retainers on the
rear frame side. Screw it later.
If the screw of installing the roof retainer (middle part) is tighten too much,the screw will run idle.
(tightening torque less than15kgf.cm)
If the screw head leans when installing the roof retainer, it will cause water leakage (water will enter
from the screw head clearance), So install it not to make clearance.
When installing the roof retainers, take out the screw fixing support rafter temporarily and pull over
the support rafter to the rafter side to make the space for installation and install the roof retainer in
order from the end.
note!
Screw the roof retainer (end) to the U-shape gutter of the side frame.
Fix the roof retainer with
small truss screw.
Take out the screw fixing
the support rafter
temporarily.
Pull over the
support rafter to
the rafter side.
Make the space to the install.
Remove the support rafter to
the original position, and fix it firmly.
roof retainer (middle)
roof retainer
(middle)
rafter
(rafter set)
(parts set)
(parts set)
(side frame set)
side frame
roof retainer (end)
roof retiner
(end)
rear frame
drilling screw
4 X 13 X
8
small truss screw
4 X 10 X
7
drilling screw
4 X 13 X
8
small truss screw
4 X 10 X
7
U-shaped
gutter
25
Summary of Contents for CSS Series
Page 35: ...35...
Page 36: ...3 2016 11 1 2015 1 SG...
