Sankyo CSS Series, Assembling Manual

Page: 16 / 36

Installation of the base hole
Installation of rafter, support rafter, side frame
Step1
Insert the anchor rod to the post.
Step1
Screw the side frame to the beam adjusting the pre-holes of side frame and beam end with
tapping screw truss 5x10x10.
When the post is moved in the length direction, put the seal on unnecessary holes.
Step1
Screw the rafter and support rafter to the
beam adjusting pre-holes of rafter, support
rafter and beam with tapping screw truss
5x10x10.
Position the support rafter next to the side
frame, and install the rafter and support
rafter alternately.
But after the 3 spans, screw the support
rafter temporarily.
When the post is moved in the length
direction, put the seal on unnecessary
holes.
Step2
Insert the post to the base hole and fix
with support stand not to fall down.
※ Before casting concrete,
check if it is flat and
vertical.
1. Installation of side frame
2. Installation of rafter and support rafter ( standard
・
deluxe )
Deluxe type
Standard type
beam beam
(parts set)
(parts set)
(parts set)
tapping screw truss
5 X 10 X 10
tapping screw truss
5 X 10 X 10
tapping screw truss
5 X 10 X 10
(side frame set)
(side frame set)
side frame
side frame
side frame
rafter
(support rafter set)
support rafter
(rafter set)
16
anchor rod