Sankyo CSS Series, Assembling Manual

Page: 24 / 36

Before installation of roof panels
Installation of roof panels
※ Confirm the post interval, vertical, horizontal and diagonal dimension of the roof.
In case diagonal dimension of the roof does
not come out, loose the screw which fix side
frame, rafter, support rafter and beam and
adjust them.
※
There is the case that panel
width dimension has two type.
Attach the panel referring “ ■
Depth dimension” of “Dimen-
sion, position of posts and
base dimension”.
When attaching the roof panels, keep following below. Below drawings indicates standard type.
Attach the roof panel of deluxe type as the same way.
※
※
When using the polycarbonate mat (SI) and FRP panel, attach the uneven-
ness side down. Otherwise the panel color is changed by sunlight.
※
Step1
Peel off the curing sheet, and put
the rolled roof panel on the rafter.
Spread it from the rear frame side to
the gutter side.
Step2
Insert the roof panel into the
rear frame, and adjust the
position on the gutter side.
Depth direction drawings
Sort the roof panel equally.
Length direction drawings ( gutter side )
Position the roof panel end at 13mm
from the end of rafter
・
side frame.
Standard
Deluxe
roof panel
Between the posts
rear frame
gutter
side frame
support rafter
rafter
24
2 1
1 2