A low limit value setting column flashes.
When no low limit setting is necessary, press H/L key without pressing ▲ key.
And then the buzzer beeps and the unit returns to「measurement and adjustment of this unit」procedures.
When a low limit setting is necessary, take the following operation without pressing H/L key.
（２） Setting a Low Limit value
（following a high limit value）
A low limit value setting column flashes.
Caution
A low limit value flashes for about 20 seconds.
Press ▲ key during this 20 seconds, or
a low limit setting interrupts and 「L : - - - μm」
stops flashing and automatically returns to the
Press ▲ key to equate with necessary value. beginning. When a low limit setting is necessary,
If the value exceeds the limit, press ▼ key, press twice H/L key to turn the screen
to decrease the value. into the above left figure.
A low limit value setting column flashes.
Press
H/L key.
The buzzer beeps.
Limit values are set and it become possible
to measure and adjust this unit.
－３６－
(Ｆｅ)
１２５
μｍ
■
Cal. No. 1
Lmt. H : 1 5 0 μm L : - - - μm
(Ｆｅ)
１２５
μｍ
Cal. No. 1 ■
Lmt. H : 1 5 0 μm L : - - - μm
(Ｆｅ)
１２５
μｍ
Cal. No. 1 ■
Lmt. H : 1 5 0 μm L : 1 0 0 μm
(Ｆｅ)
１２５
μｍ
Cal. No. 1 ■
Lmt. H : 1 5 0 μm L : 1 0 0 μm
