（１） How to select a data storing place
In this example：
A setting is made when storing data from the following
Group number： 「３」
Block number： 「１２」
Section number： 「１」
And a storing number per section is set at 「８」.
Press MEM.-SEL key.
The buzzer beeps.
Note： The Figure on the left shows numbers when this unit
is delivered.
Flashes
Caution
A memory number flashes for about 20 sec.
Press ▲ key, or ▼ key. Press MEM.-SEL key otherwise the flashing
Select a Group No. 「3」. interrupts and the previous indicated value remains
set, returning to 「Ready to measurements and
adjustments」 Try again from the beginning if
necessary to change a group number.
Flashes.
Press MEM.-SEL key.
The buzzer beeps.
－４０－
(Ｆｅ)
－
μｍ
Cal. No. 1 ■
（Ｆｅ）
－
μｍ
Cal. No. 1■
memNo. 1 1 1 S: 1 : 1
（Ｆｅ）
－
μｍ
Cal. No. 1 ■
memNo. 3 1 1 S: 1: 1
