10
4
RUNNING THE CONVEYOR
4-1. BE SURE TO GROUND MACHINE BEFORE OPERATION
4-2. STARTING CONVEYOR
100V single-phase power source
Ground earth terminal (green) of power cable plug.
200V single/three-phase power source
Ground earth terminal (green) of power cable.
NOTE: Be sure to combine controller with specified motor. Before starting conveyor, make sure that it is
grounded.
1. Make sure that RUN/STAND-
BY switch on control unit operating panel is in “STAND
-
BY” position.
1.
Turn on power supply and ensure that power LED (power-on indicator) is illuminated in green.
2. Set RUN/STAND-
BY switch to “RUN” position. Motor will start rotating and conveyor wi
ll run.
3. To increase speed, turn speed control clockwise; to decrease speed, turn it counterclockwise. Set
1.
appropriate speed for intended use.
4. To stop conveyor, set RUN/STAND-
BY switch to “STAND
-
BY” position.
fig. Control unit operating panel
Rotation direction switch
Display
Speed control
Front panel (Tool-less removal type)
RUN
／
STAND-BY switch
Mounting hole (It's located under
the front panel.)
NOTE: 1. Be sure to confirm that the power source voltage is within the rated voltage range, before
NOTE: 1.
turning ON the power source.
2. Be sure to start and stop the conveyor with RUN/STAND-BY switch. When starting and
NOTE: 1.
stopping the machine by external signals, use control circuit terminals on rear of inverter. (→See
NOTE: 1.
“Start
ing and Stop
ping the Conveyor by External Signals”, p.1
1.)
3. When leaving the conveyor unused for a long period, make sure that the power supply is off.
NOTE: 1.
(The RUN/STAND-BY switch is not for turning the power on and off.)
4. Before turning off the power supply, be sure to set RUN/STAND-
BY switch to “STAND
-
BY”
NOTE: 1.
position, otherwise there is a risk that the motor will restart rotating unexpectedly when
NOTE: 1.
powered.
Control unit standard specification
Applied motor
Brushless motor 30W
Power
source
Voltage
Single-phase AC100-120V
Single/three-phase AC200-240V
Permissible voltage
range
－
15
％
to
＋
10
％
Frequency
50
／
60Hz
Rated rotation speed
3,000r/min
Speed control range
80
～
4,000r/min
Environ-
mental
condition
Ambient
temperature
－
10
℃
to
＋
40
℃
(Avoid freezing.)
Ambient humidity
Relative humidity 85% max.
(Avoid condensation.)
Atmosphere
Indoor (Avoid splash of liquids,
corrosive/flammable gases, dust, etc.)
Elevation
1000m or less
