※
1
When no needing to set the new value, return to parameter number setting interface through
【
PROG
】
Key.Parameter numble in the second monitor flashing.
Confirmation
Some function codes need to re-confirm for the prevent of wrong operation which could be caused
of data re-written.
For example
：
set F1001=10
-23-
【
∧
】
*4
Press
【
∧
】
key, changing number to 14, second display
parameters number 14 flashing, may be revised again.
【＞】
Press
【＞】
key switch to parameters number revised
mode, second display parameters number 01 flashing,
the value could be revised
【
∧
】
*13
Press
【
∧
】
Key, parameters number revise to 14,
Seondary monitor parameters number 14 flashing,
may be revised.
【
ENTER
】
Press
【
ENTER
】
Key, switch to parameters modify mode,
primary monitior F1414 value 1 flashing,
may be amended.
【
∧
】
*9
Press
【
∧
】
key, revised the parameters value to
10, primary monitor F1414 revised value 10 flashing,
and can be amended.
【
ENTER
】
Press
【
ENTER
】
key, confirm the changing value,
secondary monitor parameter number 14 flashing,
may be modified. Parameter value revised finished.
.
Operation
Display
Description
Status monitor display
（
Frequency display
）
【
PR/CL
】
Press
【
PR/CL
】
key show display function code input
interface, secondary monitor paramerter no: 10 flashing,
may be ameneded.
