表
5-4
转速显示内容
During Inverter status monitor display, press
【＜】
key or
【＞】
key one times, switching the display content
on the primary screen at one times
,
the display content on primary screen can also be switched by the function
code. As for the details, pls. referring the function code: F2303.
When the alrarm is stopped, alarm type will be shown on the primary screen.
※
During alarm display, even press
【＜】
Key or
【＞】
Key, it can’t be switched the display on primary screen.
※
It can be switched to the function code display mode through press
【
PROG
】
key during alarm display.
-21-
Action status
Display content
Stop
Operation lamp “off”, Stop lamp “on”
Operation
Operation lamp “on”, Stop lamp “off”
Fault
Operation lamp “flashing”, Stop lamp “flashing”
Display content
Unit
7-Segments
LCD
display
Frequency
Hz
On operation:That is output frequency
At stop: That is setting frequency
Output current
A
Output Current
Rotation speed
rpm
Speed
Load factor
%
Load factor
Output Voltage
V
Output voltage
Pressure
MPa
Pressure feedback
Motor control mode
Operation
Stop
V/f
control mode
Motor synchronized speed
Set speed
Sensorless vector control
Mode
Motor estimated speed
Set speed
Speed display content
Monitor mode display
content
Operation mode display
