8. Remove the mix pan lid, drip tray and drip tray insert
(Fig. 12).
7. Remove the dasher assembly (Fig. 11 or Fig. 12)
being careful not to damage the scraper blades,
then disassemble in the following manner:
a. Remove and take apart the rear seal assembly.
b. Remove the stator rod from the dasher.
- Remove Dasher Support (WB 7110, Fig. 12)
c.
Remove the blades from the dasher (Fig. 11) by
first rotating blade upward (Fig. 13) and then
unsnapping one end from the support rod.
- Remove the blade holders from the dasher
assembly by first rotating the blade upward and
then sliding the pins out of the dasher. (WB 7110,
Fig. 12)
- Remove the blades from the blade holders. (WB
7110, Fig. 12)
d. Remove o-ring from the rear of the dasher.
Dasher Front
View
Scraper Blade
Blade Support
Tab
Support
Rod
Blade Support
Tab
Support
Rod
Dasher Front
View
Scraper Blade
Fig. 13
Scraper Blade Removal
DISASSEMBLY and CLEANING
PAGE 5
BLADES MUST BE REMOVED FOR CLEANING
Stator Rod
Fig. 11
Dasher Assembly
(WB700, WB700-2)
Scraper Blade
Rear Seal
Rear Bearing
Dasher
Fig. 14
Drip Tray Assembly
Fig. 12
Dasher Assembly (WB 7110)
Dasher
Rear Seal
Dasher Support
Blade Holder
Scraper Blade
