background image

BIDET CLEANING

Before cleaning the main unit, turn off the OFF button and unplug the toilet.

1) Use a soft sweet sponge to clean the main unit.

2) Never use aggressive product or any detergent to clean the main unit.

3) When you clean the floor around the main unit, 

avoid splashing water on the main unit to protect it.

4) Check that the Remote control receiver 

on the main unit is always clean to avoid connection 

problem between the main unit and the remote control.

INSTRUCTION OF OPERATION PANEL

When seated, press «dry/flush» button to start water flush function.

After 6 seconds, it will start dry function.

> After 3 mins, dry function will stop automatically. Press «dry/flush» button again to 

continue using. Press «stop» button to stop using.

> When nobody seated, press «dru/flush» button to start water flush function.

> When power outage, «dry/flush» button can start flush function.

When seated, press «woman/move» button, feminine cleaning nozzle is extended to 

start reciprocating self-cleaning. Press «woman/move» button again, nozzle stops 

moving reciprocatly and starts self-cleaning in the fixed position.

> while cleaning, press «stop» button to stop feminine cleaning function. If the «stop» 

button is not pressed, the feminine cleaning will stop automatically after 60 seconds.

When seated, press «wash/move» button, posterior cleaning nozzle is extended to start 

reciprocating self-cleaning. Press «wash/move» button again, nozzle stops moving 

reciprocatly and starts self-cleaning in the fixed position.

> while cleaning, press «stop» button to stop posterior cleaning function. If the «stop» 

button is not pressed, the posterior cleaning will stop automatically after 60 seconds.

Press «stop» button and stop the following functions  : posterior, feminine, dry, nozzle 

cleaning.

While the function of posterior, feminine, dry, nozzle cleaning is working, if the «stop» button  

is not pressed, the dry function will stop automatically after 3 mins, other functions will stop 

after 60 seconds. 

REMOTE CONTROL FUNCTIONS

OPERATION INSTRUCTION

Water temperature

Seat temperature

Posterior cleaning

Feminine cleaning

Wide cleaning

Transmit signal

Room temperature

Dry

Cleaning strength display

Water temperature gear

Battery display

Seat temperature gear

WOMAN

/  MOVE

WASH

/  MOVE

WARNING !

Summary of Contents for Excellence





















Reviews: