Saniclean Excellence, User Manual

Page: 6 / 20

NAME OF PARTS
Remote control
Bidet
Seat cover pad
Seat cushion
Leakage protection plug
Stainless nozzle
Tip : please do not cover
the infrared receiver,
otherwise the function
will be destroyed.
Seat cover
Warning labels within
Operation panel
Infrared receiver
Please confirm following items before entrust to repair.
ERROR PHENOMENON
Function error
Water does not come
out from nozzle
Flow of water
is not strong
CONFIRM REASON TROUBLE SHOOTING
Infrared receiver
Seat
Trim
Lamp
Valve
Filter
Mp3 interface
(No function for w660)
FAULT RECOGNITION
Temperature of cleaning water
is not enought
Seat is not heated
Dry air temperature is low
Dry function does not work
Remote control
does not work
Bidet can not flush
automatically
If electric alimentation is plug-in ?
If the water is cut off ? Wait to restore supply water.
If sluice valve is open ? Open sluice valve.
If there are foreign matter
in the strainer ?
Clean strainer.
> read page 9
If there are foreign matter
in the strainer ?
Clean strainer.
> read page 9
According to instruction
to adjust flow water
> read page 5
If inlet water valve is flexed
or blocked up ?
If the flow of water sets as low gear ?
Remove inlet water valve to flex.
If the nozzle is blocked up
by foreign matter ?
Clean nozzle
> read page 10
If inlet water valve is flexed
or blocked up ?
Remove inlet water valve to flex.
Plug-off and plug-in alimentation.
If water temperature is setted
as low gear or normal gear ?
According to instruction to adjust
water temperature.
> read page 5
If seat temperature is setted
as low gear or normal gear ?
According to instruction to adjust
seat temperature.
> read page 5
If dry function is setted as low gear ? According to instruction to adjust
air temperature.
> read page 5
If human body touches seat sensor ? Please make sure the position
of seat sensor.
Wash function does not work
If human body touches seat sensor ?
If the battery is not enought ?
Please make sure the position
of seat sensor.
Change battery.
Whether stops water supply or not ?
Wait to water supply.
Whether close sluice valve ?
Open sluice valve.
If infrared receiver is covered
by foreign matter ?
Clean foreign matter.
If the remote control is used right ? Adjust control angle
of remote control.