2
REMOTE CONTROL INSTALLATION
1) Use electric drill to drill two holes in the wall.
2) Use anchoring to fix remote control pylon
in the wall.
3) Install remote control to pylon.
Remote control
Bidet
Floor
Remote control pylon
Anchoring
3
BIDET INSTALLING
3) Stick the main unit
on the ground with an adapted
stick or cement.
4) Tighten the screw into the ground.
Sluice valve installing
and flow adjusting
Inlet water valve
Use screwdriver to rotate right
1) Connect inlet water valve to sluice valve and tighten.
2) If water pression is high, use screwdriver to
rotate right to reduce water pressure.
3) Open your network water and the water
valve to supply water to the main unit.
4
TURN ON THE POWER OF BIDET
1) Thrust protective leakage valve to socket of 220V/50HZ,
and make sure grounding-type receptacle.
2) Try to test if every functions are normal.
3) Clean foreign matter when finish installing.
Toilet
evacuation
185 mm
The seal must be perfect when installing the pipe
because of the syphonic flushing system
that can only operates with 100% Airproof.
BE CAREFUL: The pressure of your existing water
network should be at least 20 l/mn in order the
Shower toilet can operate for washing and flushing.
a
b
Flange ring installing
Flange ring
Evacuation
Pipe
Main unit
Main unit
Evacuation pipe installation
The seal must be perfect to operate the flush.
Without perfect seal flushing of the device
will not work correctly
Main unit
Flange ring
Flange ring
Summary of Contents for Excellence
Page 1: ...USER MANUAL EXCE LL ENC E ...
Page 2: ......
Page 19: ......
Page 20: ...www saniclean fr ...