Saniclean Excellence, User Manual

Page: 8 / 20

Press “stop” button to stop all function.
If the “stop” button is not pressed, the dry function will stop automatically after 3 mins,
other functions will stop after 60 seconds..
1) Pull the strainer out.
2) Use toothbrush to clean strainer.
3) Install the strainer to original place.
When seated, press “wash/move” button, posterior cleaning nozzle is extended to the right position to
start the reciprocating self-cleaning. Press “wash/move” button again, nozzle stops moving reciprocatly
and starts self-cleaning in the fixed position.
While cleaning, press “stop” button to stop cleaning function. If the “stop” button is not pressed, posterior
function will stop automatically after 60 seconds.
When seated, press “woman/move” button, feminine cleaning nozzle is extended to the right position to
start the reciprocating self-cleaning. Press “woman/move” button again, nozzle stops moving reciprocatly
and starts self-cleaning in the fixed position.
While cleaning, press “stop” button to stop feminine function. If the “stop” button is not pressed, feminine
function will stop automatically after 60 seconds.
When seated, press “wide cleaning” button, cleaning nozzle is extended to start the reciprocating
wide-cleaning. Press “wide cleaning” button again, nozzle stops moving reciprocatly and starts
wide-cleaning in the fixed position.
While cleaning, press “stop” button to stop cleaning function. If the “stop” button is not pressed, posterior
function will stop automatically after 60 seconds.
When seated, press “dry” button to dry cleaning position. Dry function starts working.
After 3 mins, it will stop automatically.
If you want to continue using, press “dry” button again. Press the “stop” button to stop dry function while
it is working..
Adjust gear : when using functions of posterior, feminine, wide-cleaning, press “adjust” button to adjust
“high, middle, low” gear, set the gear and save it at the same time. While using dry function, press “adjust”
button tu adjust “air temperature” as “high, middle, low” gear, set the gear and save it at the same time.
While using the functions of posterior, feminine, auto wash, press “massage” button to start massage,
press “massage” button again, to stop massage. At the same time, the flow of water restores normal
cleaning mode. Massage flow of water based on “high-low-high” mode starts cycle changes.
Press “auto flush” button to flush toilet.
Press the “nozzle cleaning” button, the nozzle starts self-cleaning automatically. It will stop after 60
seconds. Press the “nozzle cleaning” button twice, nozzle is extended to do manual cleaning.
If you want to stop nozzle cleaning, press the “stop” button to stop.
(Tip : when start dry function, nozzle cleaning can’t work.)
Press “seat temp” button and adjust seat temperature.
s LIGHT OFF NORMAL TEMPERATURE
s GREEN LIGHT LOW TEMPERATURE ­#
s ORANGE LIGHT MIDDLE TEMPERATURE ­#
s RED LIGHT HIGHT TEMPERATURE ­#
Press “water temp” button and adjust water temperature.
s LIGHT OFF NORMAL TEMPERATURE
s GREEN LIGHT LOW TEMPERATURE ­#
s ORANGE LIGHT MIDDLE TEMPERATURE ­#
s RED LIGHT HIGHT TEMPERATURE ­#
Press “light” button, shimmer light makes more convinient to go to toilet in the night.
Press “light” button again to extinguish the shimmer light.
Moving : while using the functions of posterior, feminine, wide-cleaning, press the “front” and “back”
button, can adjust the cleaning position of front and back.
3
#,%!. $%/$/2):!4)/. 342!).%2
./::,% #,%!.).'
1) Press “nozzle cleaning” button in remote control to start nozzle
cleaning.
Tip : the bidet has automatically flush function : before and after
posterior and feminine function.
2)
Press the “nozzle cleaning” button twice, nozzle is
extended, can clean by hands.
Use toothbrush to clean nozzle.
3) Press “stop” button to take back nozzle.
WASH
/ MOVE
WOMAN
/ MOVE