![background image](http://html.mh-extra.com/html/allora/a-720-series/a-720-series_manual_2903758001.webp)
Tools
• Adjustable Wrench (2)
'
Teflon Tape
�
Groove Joint Plier
�
• Phillips Screwdriver
• Silicone Sealant
�
,�
�
Maintenance
Your new faucet is designed for years of trouble-free
performance. Keep it looking new by cleaning it
periodically with a soft cloth. Avoid abrasive cleaners,
steel wool and harsh chemicals as these will dull the finish
and void your warranty.
Safety Tips
• If you use soldering for the installation of the faucet, the
seats, cartridges and washers will have to be removed
before using flame. Otherwise, the warranty will be void
on these parts.
• Protect your eyes with safety glass when cutting or
soldering water supply lines.
• Cover your drain to avoid losing parts.
Important Points
Prior to beginning installation, turn off the cold and hot
water lines and turn on the old faucet to release built-up
pressure. When installing your new faucet, turn the
connector nuts finger tight, then use a wrench to anchor
the fitting and a second wrench to tighten the nut one
additional turn. Connections that are too tight can
compromise the integrity of the system. Wrap all threaded
connections with a teflon tape. Always wrap in a clockwise
direction.
Need Help
Have a question? Just call 1888 MY ALLORA,8 a.m. to 5 p.m. EST
Monday-Friday, or send emails to customer [email protected]
For Models: A-720
Single Handle Pull-out
Kitchen Faucet
�
ALLORAUSA
QUALITY FORL!FE
( (888) MY-ALLORA)
v.r\v,,v.ALLORAUSA.com