15
Version: 20221219
The operator should always seek the applicable safety information for the media to be filtered
as well as media used for the cleaning and storage of membrane modules (e.g. handling and
storage and conduct in emergency situations).
WARNING
Personal safety equipment should always be worn when applicable (e.g. safety goggles, safety
gloves etc.).
WARNING
Do Not use media with biological materials in Safety Classes 2 and 3.
WARNING
Do Not use flammable or potentially explosive substances.
WARNING
Do not use unstable media where concentration changes might start chemical reactions
within the media.
WARNING
The operator should always make sure that the media to be filtered is compatible with the
materials in fluid connection in the Vibro-I (PP, Stainless Steel and silicone) and the feed
system used.
ATTENTION
D.
Pressurized components
The pressure and media flow needed to drive the filtration in the Vibro-I is generated by an
external feed system (not included). The external feed system and the pipes, hoses and
fittings between the external feed system and the Membrane Assembly including the
Membrane Assembly are a separate pressurized system.
The system must be operated at maximum 4 bar(g)
at room temperature and the external
feed system must have a CE approved safety valve set at
maximum 4 bar(g)
. Parts of the
system can burst if they are subjected to pressures over 4 bar(g).
WARNING
Operating Pressure: 0-4 bar(g) at 5-35 °C, 0-3 bar(g) at 5-55 °C and 0-1 bar(g) at up to 80°C.
WARNING