17
GB
DISCONNECTING YOUR BLUETOOTH
DEVICE
To disconnect your Bluetooth device, either turn off
Bluetooth on the Bluetooth device or switch to another
mode on the radio, for instance by tuning into an internet
radio station. If you disconnect the Bluetooth device
when the radio is in the Bluetooth mode, the white bar
near the top of the radio’s display will show “Bluetooth
Disconnected” and the radio will be available for pairing
again.
To connect to a different device, press the pair button on
the remote or apply a long press on the volume control on
the radio.
10. LISTENING TO MUSIC USING THE
AUX IN JACK
You can listen to the sound of an external device through
your WFR-32’s speaker. To do this, follow these steps.
1.
Connect the external device (such as iPod, MP3 player
or CD player) to the radio’s Aux-in port (16) using a
3.5mm audio cable (not supplied).
2.
Make sure both the radio and the external device are
turned on.
3.
Select the
AUX
option in the radio’s main menu.
4.
The audio output of the external device will now be
played through the speaker of your WFR-32. The
volume can be adjusted using the radio’s Volume
Control (4) or the Volume buttons (u) on the remote
control.
11. LISTENING TO MUSIC USING THE
HEADPHONE JACK
The WFR-32 is equipped with a Headphone jack (17)
on the back of the radio, which can be used to connect
a pair of headphones with a 3.5mm plug. To connect the
headphones, simply plug the 3.5mm jack into the socket.
The radio will then automatically detect that a pair of
headphones has been connected and it will disable its
internal speaker.
We recommend turning the volume down before
connecting the headphones and raising it slowly to a
suitable level after connecting the headphones to avoid
loud sounds and damaging your hearing.
Note:
Excessive sound pressure from earphones and
headphones can cause hearing loss. To prevent
possible hearing damage, do not listen at high volume
levels for long periods of time.
Troubleshooting
Observation
Potential Cause / Solution
No Power / function
●
Check if the power switch
has been turned to the
ON position.
●
C h e c k i f t h e p o w e r
a d a p t o r i s p r o p e r l y
connected to the power
outlet.
Function disturbance
●
Try performing a factory
reset.
●
Turn the power switch to
the OFF position. Leave
it there for 1 minute and
switch the radio back on
again.
No Internet Connection
●
Ensure Wi-Fi mode is
selected in settings and
that the correct password
has been entered for the
network.
●
Try performing a factory
r e s e t a n d t h e n t r y
reconnecting.
●
Turn the power switch to
the OFF position. Leave
it there for 1 minute and
switch the radio back on
again.
Time or date are wrong
●
Check the Clock settings
and set the time once
again.
Summary of Contents for WFR-32
Page 1: ...GB Version 1 WFR 32...