16
GB
WAV / FLAC (sampling rate up to 48 KHz)
USING THE USB CHARGING PORT FOR
CHARGING A USB DEVICE
If you want to charge a USB device (such as your
smartphone), connect the device to the USB charging port
(15) using a suitable USB cable (not supplied) and make
sure the radio is connected to the mains supply.
Note:
The USB charging port (15) supports a maximum
output power of 5V / 1A.
9. L I S T E N I N G V I A B L U E T O O T H
STREAMING
In order to stream Bluetooth music to your radio, you need
to pair your Bluetooth device with your WFR-32. Pairing
creates a ‘bond’ so two devices can recognize each other.
PAIRING YOUR BLUETOOTH DEVICE FOR
THE FIRST TIME
1.
Turn on the radio using the Power button (1) on the
radio or the Power button (a) on the remote.
2.
Select the
Bluetooth
option in the radio’s main menu to
switch to the Bluetooth mode.
3.
Activate Bluetooth on your Bluetooth device (refer to the
manual of the Bluetooth device if you are unsure about
how to active Bluetooth).
4.
Go to the Bluetooth list on your Bluetooth device
and select the device named “WFR-32” (if you
have changed the name of the radio in the radio’s
Configuration
menu, search for the name you have
given the radio instead).
Note:
On some Bluetooth devices with Bluetooth version
2.1 or earlier, you might be requested to enter a
pass code. If this is the case, enter the pass code
“0000”.
5.
After the devices have paired and connected, a
confirmation tone will be played on the radio and the
white bar near the top of the radio’s display will show
the message “Bluetooth Connected”.
You can now play music on your Bluetooth device and
stream the music through the radio’s speaker.
Notes:
●
If 2 Bluetooth devices are pairing for the first time,
both must search for your radio, it will show its
availability on both devices. However, if one device
links with this unit first, then the other Bluetooth
device won’t find it on the list.
●
If you take your Bluetooth device out of range,
the connection between your device and the radio
will be temporarily disconnected. Your radio will
automatically reconnect if the Bluetooth device is
brought back into range. Be aware that during the
period of disconnection, no other Bluetooth device
can pair or link with your radio.
●
If “WFR-32” shows up in your Bluetooth device list,
but your Bluetooth device cannot connect with it,
please delete the item from your list and pair the
Bluetooth device with the radio again following the
steps described previously.
●
The effective operation range between the radio
and the paired Bluetooth device is approximately 10
meters (30 feet). Any obstacle between the system
and the device can reduce the operational range.
●
Bluetooth connectivity performance may vary
depending on the connected Bluetooth device.
Please refer to the Bluetooth capabilities of your
device before connecting it to your radio. Not all
features may be supported, depending on the
Bluetooth device used.
●
With some mobile phones, making / receiving
calls, text messages, e-mails or any other activities
unrelated to audio streaming may mute the
Bluetooth audio streaming or even temporarily
disconnect from your device. Such behavior is
a function of the Bluetooth device and does not
indicate a problem with your WFR-32.
AUDIO PLAYBACK IN THE BLUETOOTH
MODE
When you have successfully connected your radio with
the chosen Bluetooth device you can start to play your
music using the controls on your connected Bluetooth
device.
1.
Once playback has started, the display will show cover
art (if available), the connected Bluetooth device name,
the artist’s name, the track name, the album name and
the playback progress. repeatedly press the Next button
(6) on the radio or Right button (r) on the remote control
to zoom in on the cover art or view it in full screen.
2.
Adjust the volume to the required setting using the
Volume control (4) on the radio, the Volume buttons (u)
on the remote control or on your Bluetooth device.
3.
Use the controls on your Bluetooth source device to
play / pause and select tracks. Alternatively, playback
can be controlled using the remote control using the
Play / Pause (g), Next track (n), and Previous track
(h) buttons on the remote control or by pressing and
holding the Previous (5) and Next (6) buttons on the
radio to go to the previous or next track.
Note:
Not all player applications or devices may respond to
all of these controls.
AUDIO PLAYBACK FROM A PREVIOUSLY
PAIRED BLUETOOTH DEVICE
The WFR-32 can memorize up to 8 sets of paired
Bluetooth devices. Once more than 8 devices have been
connected, the earliest device with which the radio was
paired will be overwritten in the radio’s memory.
If your Bluetooth source device has previously paired with
the WFR-32 previously, the radio will still remember your
Bluetooth device and attempt to reconnect with the device
that was last connected. If the last connected Bluetooth
device is not available, the radio will try to connect to the
second last Bluetooth device.
Summary of Contents for WFR-32
Page 1: ...GB Version 1 WFR 32...