15
GB
Changing the network connection
In the sections above, you chose how your radio would be connected to your network, using a WiFi
connection. From time to time, you may find that you need to connect to different computer networks.
The Network Settings menu allows you to change your radio’s network settings, scan for an alternative
wireless network, or to manually configure the network parameters.
The steps outlined below describe how you can do this - see also the section 'Network profiles'.
Configuring the radio to use an alternative WiFi connection
From the Network Settings menu select 'Network wizard'. This will present you with details of any
WiFi networks that are found. Scroll down the list using the Menu Up or Down buttons to the desired
network name. Press the Select button to select this network.
The radio will then use its WiFi system to communicate with the network. Depending on the settings
for the new network you may need to enter an encryption key. By default the radio will then acquire
an IP address and other network settings from the network's router using DHCP (Dynamic Host
Configuration Protocol).
Network wizard
Scanning... /
Network settings
Main menu
Bluetooth
AUX-IN
Sleep
Alarms
System settings
>
System settings
Equaliser
Streaming audio quality
Network
Time/Date
Backlight
>
>
>
>
>
Network settings
Network wizard
PBC Wlan setup
View settings
Wlan region
Manual settings
>
