6
Using the radio for the first time
1. Place your radio on a flat surface and plug the mains lead into the mains socket located on the
left side of your radio ensuring that the plug is pushed fully into the socket.
2. Plug the other end of the mains lead into the wall socket and switch on the wall socket.
IMPORTANT:
The mains adaptor is used as the means of connecting the radio to the mains supply. The
mains socket used for the radio must remain accessible during normal use. In order to dis-
connect the radio from the mains completely, the mains adaptor should be removed from the
mains outlet completely.
3. When you apply power, the display on the radio will light up and say: 'SANGEAN'. The first
time that you use your radio (or after Factory Reset) the display will show “Setup wizard” and
“YES” will be highlighted on the screen. Press the
Tuning Control Rotary
to start the setup
wizard. The screen will ask if you wish to run the setup wizard again at the next start up. This
will lead to the main menu.
4. Rotate the
Tuning Control Rotary
on the right hand side of the unit to highlight the desired
clock format (either 12 or 24 hour) then press the
Tuning Control Rotary
to enter your
selection. A menu allowing you to specify the auto update option for the clock will appear on
the display.
5. Rotate the
Tuning Control Rotary
to choose an auto-update option for the clock. This can be
updated from DAB or FM radio, or not updated. The default is to auto update from the DAB.
If you choose “No update” you will need to set the clock manually later( see the section of
‘Manually setting the clock’). Press the
Tuning Control Rotary
to confirm your choice.
3-5
Start now?
Setup wizard
WELCOME TO
DIGITAL RADIO
12/24 hour format
Time / Date
Update from DAB
Update from FM
No update
Auto update
*
Run wizard again at
next start up?
Setup wizard
*
