23
GB
Disconnecting your Bluetooth device
Press and hold the Bluetooth pairing button for 2-3 seconds to disconnect with your Bluetooth
device. You can also press the
Mode
button and rotate the
Tuning Control Rotary
to select any
mode other than Bluetooth mode and then press the Tuning Control Rotary or turn off Bluetooth
on your Bluetooth source device to disable the connection.
If you disconnect the Bluetooth device when you are in Bluetooth mode, the “Pairing” will show
on the display, indicating Bluetooth is available again for pairing.
Clock and Alarms
Automatically updating the clock
You may specify that the radio sets its clock from DAB or FM radio broadcasts. After a power
failure the radio will then set its clock the next time that you turn on the radio in DAB or FM mode.
Alternatively you may specify that the time is not automatically updated. In this case the clock
must always be set manually after a power interruption.
1. With your radio switched on, press the
Menu
button to access the menu for the current mode.
2. Rotate the
Tuning Control Rotary
until 'System settings' is highlighted on the display. Press
the
Tuning Control Rotary
to enter the system settings menu.
3. Rotate the
Tuning Control Rotary
until 'Time/Date' is highlighted on the display. Press the
Tuning Control Rotary
to enter the time setup.
4. Rotate
Tuning Control Rotary
until 'Auto update' is highlighted on the display. Press
Tuning
Control Rotary
to enter the auto-update menu.
5. Rotate the
Tuning Control Rotary
to choose an update option from 'Update from DAB',
'Update from FM', or 'No update' as required. Press the
Tuning Control Rotary
to confirm
your choice. The radio will then exit to the previous menu display.
2-5
1
Backlight
Equaliset
Time/Date
Inactive Standby
Language
>
>
>
>
>
System settings
Set Time/Date
Auto update
Set format
Time/Date
*
Update from DAB
Update from FM
No update
Auto update
