15
GB
FM Radio
Operating your radio in FM mode
1. Carefully extend the telescopic aerial and press the
Standby
button to switch on your radio.
2. Press the
Mode
button and rotate the
Tuning Control Rotary
as needed to highlight FM radio
mode. Press the
Tuning Control Rotary
to select the option.
3. Rotate the
Tuning Control Rotary
in a clockwise direction. The displayed frequency will
increase. Press the
Tuning Control Rotary
to carry out an auto-tune. Your radio will scan
up the FM band from the currently displayed frequency and will stop scanning when it finds a
station of sufficient strength.
4. The display will show the frequency of the signal which has been found. If RDS information
is available, after a few seconds the display will show the radio station name. If you only hear
hiss or interference, simply press the
Tuning Control Rotary
to scan further. Your radio may
have found a spurious interference signal.
5. To find more FM stations press the
Tuning Control Rotary
to repeat the scan operation. To
scan down in frequency, rotate the
Tuning Control Rotary
in a anti-clockwise direction first
and then press the
Tuning Control Rotary
. Your radio will scan down the FM band from
the currently displayed frequency and will stop scanning when it finds a signal of sufficient
strength.
6. When the end of the waveband is reached your radio will recommence tuning from the
opposite end of the waveband. Use the
Volume
buttons to adjust the sound level as needed.
2-5
1
2
6
FM
radio
104.90MHz
FM
10:38
FM Radio
V.H.B.N.
FM
10:39
FM Radio
