Sangean BTR-160 Manual Download Page 27 | Manualshive

Page: 27 / 39

background image

26

Setting the alarm clock

Your radio has two separate alarms which can be set to wake you to either the radio or a buzzer
alarm. In the event of a power interruption your radio has built in memory that will retain your
alarm settings. Ensure that the time is set correctly before setting the alarms.
1. Press the

Menu

button and rotate the

Tuning Control Rotary

until ‘Main menu’ is highlighted.

Press the

Tuning Control Rotary

to enter the menu.

2. Rotate the

Tuning Control Rotary

until ‘Alarms’ is highlighted and the press the

Tuning

Control Rotary

to enter the selection.

3. Rotate the

Tuning Control Rotary

until the desired alarm (1 or 2) is highlighted on the display.

Press the

Tuning Control Rotary

to enter alarm setup.

4. Rotate the

Tuning Control Rotary

until 'Time' is highlighted on the display. Press the

Tuning

Control Rotary

to adjust the alarm time.

5. Rotate the

Tuning Control Rotary

to choose the alarm hour. Press the

Tuning Control

Rotary

to confirm the setting.

6. Rotate the

Tuning Control Rotary

to choose the alarm minute. Press the

Tuning Control

Rotary

to confirm the setting. The display will then return to the alarm setting menu. If the

radio has been set to use a 12 hour clock format, there will also be an option here for setting
AM or PM for the alarm time.

7. Rotate the

Tuning Control Rotary

to highlight 'Enable' and press the

Tuning Control Rotary

.

The display will show the Frequency options for the alarm. The alarm frequency options are as
follows:

  'Off' - the alarm will be disabled
  'Daily' - the alarm will sound everyday
  'Once' - the alarm will sound once
  'Weekends' - the alarm will sound only at weekends
   'Weekdays' - the alarm will sound on weekdays only
   Rotate  the

Tuning Control Rotary

to choose the required alarm frequency option. Choosing

Off will disable the alarm. Press the Tuning Control Rotary to confirm the selection. If you
choose to set the alarm to Once you will also need to set the date using the

Tuning Control

Rotary

.

1-11

1

Alarm 1: Off [00:00]

Alarm 2: Off [00:00]

Alarms

Enable:Off
Time: 00:00
Mode: Buzzer
Volume: 20
Save

Alarm 1

Enable:Off
Time: 07:30
Mode: Buzzer
Volume: 20
Save

Alarm 1

Off
Dailf
Once
Weekends
Weekdays

Alarm 1 frequency

07:00

Alarm 1 time

07:30

Alarm 1 time

2 6 - 0 4 - 2 0 1 6

0 7 : 3 0

Alarm 1 date/time

«
...
25
26
27
28
29
...
»

Summary of Contents for BTR-160








































Reviews:

No comments

Related manuals for BTR-160

Brand: B&G Pages: 29

Brand: JB.lab Pages: 56

Brand: Kambrook Pages: 2

Brand: Sailor Pages: 12

Brand: SAGEMCOM Pages: 120

Brand: Ferguson Pages: 21

Brand: C. Crane Pages: 36

Brand: Xoro Pages: 32

Brand: Technoline Pages: 62

SureCross DX80SRxM-H

Brand: Banner Pages: 4

Brand: Sandstrom Pages: 48

Brand: Gogen Pages: 28

Brand: Wintec Pages: 16

Brand: Curtis Pages: 3

LB1 (29.6 - 36.0MHz)

Brand: Motorola Pages: 26

Brand: Motorola Pages: 45

Brand: Motorola Pages: 54

Brand: Motorola Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands