KBox E-410-APL - User Guide, Rev. 1.0
// 36
To mount the KBox E-410-APL please proceed according to the steps described:
1.
Prepare the mounting surface with sufficient screws (four screws for VESA mount) and if necessary anchors
corresponding to the mounting surface type if no VESA-compliant screw holes are available. (The recommended
screw size is M4 x 6 ~ 10 mm but it still depends on the available screw holes of the mounting surface and never
be larger than M4 if any.)
2.
Secure the base mounting bracket to the mounting surface with screws (Figure 14). The following figures take
VESA mounting to a monitor as an example.
Figure 14: Securing the base mounting bracket
3.
Secure the hooked mounting bracket onto the bottom side of the KBox E-410-APL (Figure 15) with M3 screws (6
mm long). The front I/O panel should be placed upward.
Figure 15: Securing the hooked mounting bracket onto the KBox E-410-APL