COMe-cTL6 – User Guide Rev. 1.7
// 80
Sub-Screen
Function
Second level Sub-Screen/Description
Power &
Performance>
CPU Power Management
Control>
C States
CPU power management. Allows CPU to
enter C states when not 100% utilized.
Values beyond the range clipped to
min/max supported by SKU.
[Enabled, Disabled]
Package C State
Limit
Maximum C State limit setting, where
AUTO initializes to deepest available
package C State limit.
[Auto, CPU Default, C0/C1, C2,….…C10]
GT Power Management
Control>
RC6 (Render
Standby)
Check to enable render standby support.
[Enabled, Disabled]
Maximum GT
frequency
Values beyond the range clipped to
min/max supported by SKU.
[Default Max Frequency, 100 MHz,
150 MHz, …1200 MHz]
Prevent Turbo on
GT frequency
Enable to disable the Turbo GT when
disabled GT frequency is not limited.
[Enabled, Disabled]
PCH-FW
Configuration>
Firmware Update
Configuration>
Me FW Image Re-
Flash
[Enabled, Disabled]
FW Update
[Enabled]
PTT Configuration>
TPM Device
Selection
[dTPM]
Extended CSME
Measuremnet to
TPM_PCR>
[Disable]
Thermal
Configuration>
Use Generic Thermal
Functions>
[Enable/Disable]
CPU Thermal
Configuration>
DTS SMM
Disabled: uses HWM reported
temperature values
Enabled: uses DTS SMM mechanism to
obtain CPU temperature values
Out of spec: uses HWM and DTS SMM
[Disabled, Enabled, Critical Temp
Reporting (out of Spec)]
TCC Activation
Offset
Sets temperature at which TCC must be
activated (range: 0 to 63).
[0]
Disable
PROCHOT# Output
[Enabled, Disabled]
Platform Thermal
Configuration>
Critical Trip Point
The point at which the OS begins to shut
the system off.
[130 C, 119 C (POR)…15 C]
Passive Trip Point
The point at which the OS begins to
throttling the processor.
[119 C (POR), 95 C, …15 C, Disabled]
Passive TC1 value
TC1 value for ACPI passive cooling formula
(range: 1 to 16).
[1]
